icon
GE Healthcare
Case + T2100
Treadmill
CASE + T2100 adalah Alat rekam jantung dengan penambahan beban untuk memastikan kondisi jantung yang tidak terdeteksi dengan penggunaan Resting ECG.

Kelebihan dari tipe CASE ini adalah lebih paten dan kuat. Untuk print menggunakan therma paper.

  1. Sistem Operasi Windows XP
  2. 19 "LCD High Color Resolusi
  3. Penyimpanan 2000 (min.) Stress test pada hard disk
  4. Pengungkapan penuh: Storage semua 12-lead EKG dari seluruh kasus (dari Pre-Test sampai Uji End)
  5. Berat alat : 200 Kg
  6. Beban pasien yang dapat ditanggung 150 Kg
  7. Tombol Emergency
  8. 0-25% kisaran elevasi permukaan berjalan 60 inch
  9. Mengkalibrasi sendiri untuk kecepatan
  10. Ekspor ke Microsoft Word & Adobe Acrobat (PDF)
  11. Arsip CD untuk penyimpanan permanen data pada CD-ROM
  12. CAM-14 Akuisisi Modul : untuk memfilter gambar
  13. Kabel EKG pasien lebih pendek, kurang kebisingan & artefak dari sinyal analog
  14. Sinyal dari CAM-14 adalah digital yang kebisingan gratis, lebih akurat bentuk gelombang ECG
  15. ST / HR Histeresis
  16. Prognosis & Stress Test Interpretasi
  17. Lead-Check Display : Menampilkan kontak elektroda pada kulit selama tes stres Hijau: kontak yang baiK, Kuning: moderat, Red: elektroda off·
  18. Finite Residual Filter (FRF) : Untuk memfilter hasil gambar yang baik karena beban jantung. 
  19. Indikator prognosis : terdapat software yang dapat membantu/mendukung dokter menentukan diagnosa kemungkinan risiko kematian jantung mendadak kedepannya

                                         

Technical Specification

SPEC SHEET GE STRESS TEST SYSTEM
PRODUCT NAME STRESS TEST SYSTEM with TREADMILL and Export data reports and full disclosure ECG
TYPE : CASE and T-2100  
BRAND : GE HEALTHCARE  
COUNTRY : MEXICO  
   
   
   
   
   
TECHNICAL SPECIFICATION
CASE  
Performance Specification  
Signal processing
ECG analysis frequency  500 Hz
ST measurements ST amplitudes, slope, Integral, Index, ST/HR hysteresis, ST/HR slope, ST/HR loops, ST/HR Index up to 15 leads
E, J and post-J point Manual or computer selected
Signal processing  Incremental median updating technique
Baseline correction Finite Residual Filter (FRF) and/or Cubic Spline analysis
QRS detection and analysis Automatic or manual lead selection
ECG output Real-time ECG/QRS beep/TTL synchronization output
Heart Rate Automatic arrhytmia detection, documentation and annotation
Full-disclosure ECG  Beat-to-beat ECG storage and event review
Reanalysis Post-test medians measurements from E, J, post-J point selections
ECG Intepretation (Optional) Marquette®12SL resting ECG analysis program for adults and pediatrics
Additional ECG function XTI stress interpretation
  Vectorcardiography (15 lead)
Data Acquisition 
Technology   
  Active "Type BF" floating isolated powered 14-channel acquisition module with built-in lead-fail detection and lead prep impedance measurments 
Sampling rate  Over-sampling @ 16000 Hz, 12 leads
Skew 62.5 μs
Dynamic range  320 mV,± 10mV signal superimposed on ± 150 mV DC offset
Resolution 4.88 µV/LSB @ 500 Hz 
Noise < 15 µV peak-to-peak noise over 0.01 to 150 Hz (-3 dB) bandwidth
High pass filter 0.01 (or 0.05 Hz, special use) with DC offset control
Low pass filter 20,40,100 or 150 Hz (selectable)
Line filter 50.0 or 60.0 Hz notch filter (selectable)
Baseline correction Cubic Spline Algorithm
Artifact/baseline correction Finite Residual Filter (FRF) analysis
Common mode rejection >140 dB (123 dB with AC filter disabled)
Input impedance  > 10 M Ohms @ 10 Hz, defibrillator protected
Patient leakage  
Pace detect Orthogonal LA, LL and V6; 750 µV @ 50 µs
   
Physical specifications  
Height 148 cm (58 in.) with ni monitor installed (LCD display rotates vertical and horizontal for optimum viewing)
Width 62 cm (24 in.) with paper tray removed
Depth 75 cm (30 in.)
Weight 68 kg (150 lb) without monitor
Wire paper tray 31.75 cm x 23.50 cm (12.50 in. x 9.25 in.) attaches to left side of CASE system
Acquisition module holder tray 6.60 cm x 23.50 cm (2.6 in. x 9.25 in.) attaches to right side of CASE system 
Interface included Acquisition module - CAM 14
  Keyboard - alpha numeric
  Keypad - dedicated stress function keys
  MouseIntegrated Thermal Paper
  10 MB/100 MB/1 GB Ethernet - MUSE® compatible
  USB ports - 4
  PS2 portrs - 2
  Serial ports - 6, COM 1-2, COM A-D, treadmill, BP, ergometer, Sop2
  Analog port - 4, TTL (trigger) - 1; output (imaging sync) and analog device communication
  DVD/CD-RW drive: readable; archive; CD-RW media only
  SD card
   
Environmental specifications  
Power requirements  
Power supply AC operation only
Operating voltage range 100-120 VAC, 47-63 Hz, 2.8 A
  200-240 VAC, 47-63 Hz, 1.4 A
Power consumption 350 W max (1200 BTU/h)
   
   
Operating conditions  
Temperature (+)10 to 400C (+50 to 1040F)
Humidity 20 to 95% RH non-condensing
Pressure 700 tp 1060 hPa
Storage/transport conditions  
Temperature (-)40 tp (+)700C (-40 to 1580F) (paper discoloration may occur at high temperatures)
Humidity 15 tp 95% RH non-condensing
Pressure 500 to 1060 hPa
   
Display  
Display Type LCD ( Flat Panel Display )
Display Rosulution ( min ) 1280 x 1024
Display Size  19 inch diagonal DVI
Monitor Leads 3,6,12 or 15
Display Leads Number on screen 3,6,12 or 15
Display Data ST Scan/median complexes, arrhytmias, ventricular ectopic/min.
  counter, 3 to 12 (up to 15, optional), lead check torso and 12 leads,
  waterfall displays, trends, tabular summary, strored ECG strips,
  interpretation, time-of-day clock, patient name, warning messages 
  and prompt
Operating System Windows 7 Ultimate 64-bit
Processor Dual Core
RAM 2GB
Memory 250 GB or 2000 minutes
   
Writer  
Writer Technology Instant load, thermal dot array
Writer leads 3,6,12, or 15 ( standard, NEHB, Cabrera, Configurable )
Writer speed 5, 12.5, 25 and 50 mm/sec
Paper type  Thermal, Perforated, Fan-fold, 300 sheets per pack
   
TREADMILL  
   
 Specification   
Physical Specifications
Weight 181.4 kg (400 lbs.)
Walking area 45.7 x 152.4 cm (18 x 60 in.)
Floor space required 73.7 x 195.6 cm (29 x 77 in.)
Walking surface height 14.0 cm (5.5 in.)
Handrail height above walking surface Front - 101.6 cm (40 in.)
  Side - Maximum 88.9 cm (35 in.) descending
  at a 5° angle to 81.3 cm (32 in.)
Environmental Specifications  
Power requirements 200 to 240 VAC, 50/60 Hz, single-phase, 20 amperes,
  NEMA 6-20 R wall socket (dedicated circuit recommended)
Operating Conditions  
Ambient temperature  10° C to 40° C (50° F to 95° F)
Relative humidity 15% to 90%
Storage Conditions  
Temperature Range  (-)18° C to 49° C (100° F to 120° F)
Relative humidity 15% to 90%
Performance Specifications  
Maximum rated load 204 kg (450 lbs.)
Belt speed range 0 to 21.7 km/h (0 to 13.5 mph) at 60 Hz continously variable, 0 mph start-up
   
Driver motor 3.0 HP
Elevation motor 1/10th hp
Elevation range 0 to 25% grade, continuous variable
Maximum leakage current 100µA, chassis to ground
   
Patients Safety
Walking surface 60-inch
Stopping modes Two stopping modes
Handrail set Standard full handrail set
Emergency stop switch Standard emergency stop switch
Starts From 0 mph
Speed range 0 to 13.5 mph
Weight capacity 450 lbs
Grade range 0 to 25 percent 
   
Reliability
-  Enchanced tolerance to electrical changes for greater patient safety
-  3.0 horsepower (hp) motor  
-  Self - calibrating for speed and grade
-  Digital control insures precise speed and grade control
 
Accessories :
1.  Digital Acquisition Module with 14-leadwire, AHA, Grabber Patient Cable                                                    1 kit
2.  Treadmill with Power Cord & Interface Cable to Sresstest System                                                           1 unit
3.  Accessories Kit, includes:             
     Disposable Electrodes (sample packs), Recording Paper (sample pack)                                                   1 kit
4   Operator manual                                                                                                                                        1 book
 
ONE YEAR WARRANTY & ON CALL SERVICE 24 HOURS